The AutoStack XP stacker has taken 3 staff and 3 telehandlers out of the equation

Jeff chose the XP54 model because he likes the way it handles bales and it has less moving parts than other stackers.

– Jeff Watkins, AutoStack XP

Catherine and Jeff Watkins own a farm at Kukerin in Western Australia’s wheatbelt. Their main crop is oaten hay for export, along with wheat, barley, and lupins. At the time they considered getting a stacker in 2016, they were doing 10,000 bales of hay a year and they were unsure if that volume could justify the cost of an auto-stacker.

They used to hire several telehandlers to move their bales three at a time, and stack them into zones six bales high and 40 ft. long for trucking purposes, so the paddock would end up looking like a block of flats. That worked well for 10 years, but then Catherine and Jeff developed their farming practices. Instead of cultivating paddocks, they protected their soil with no-till direct drilling. Their soil is improving, but the surfaces are rough. “It was a tough gig on the operators driving telehandlers over the paddocks, plus it beat the machines up, so we went down the path of an auto-stacker” Jeff says.

In 2016 Arcusin stackers were a rarity in Australia. Jeff did his own research and decided the AutoStack XP model was the best machine for the job. ”The Arcusin picks the bales up directly on the A-B line and spins them on the machine. It has less moving parts and less maintenance than other stackers. I work with 4x3 and 4x4 bales, and I liked that I could change settings for the different sized bales within the cab. To adjust the wings on the trailer or change for bales of different lengths just takes a few minutes of manual adjustment”.

Jeff and Catherin’s AutoStack is offset so the driver can clearly see the loading elevator bed in the mirror. The driver lines up the elevator arm with the bale, and then the bale rides up to the table and is nudged into position. When loaded, the operator backs up to the stack and the bales lift off in a vertical stack, six high and two wide. A hydraulic leg pushes the bottom bale off as the machine drives forward.

We bought it to look after our staff and machines, but it is 10-fold better than that. We are using the XP54 like a chaser bin and it has made us a lot more efficient

Jeff says the support he has received from Arcusin has always been excellent. “They are a family-run business and I was impressed with their attitude. They came out here to meet everyone who owns their machines and listened to what we had to say”.

Jeff pulls his AutoStack with a 210 HP tractor. The tractor’s tires are filled with water to counter-balance the weight of the loaded trailer. The machine has a steering axle and will go anywhere. The only issue Jeff faces is keeping the sensors clean in the dusty WA environment. “This is really dry farming and some years we can’t see the bale stacker with all the dust. But all our machines are driven by sensors, so we have learnt to adapt and know if we have any issues which sensors to clean”.

The Arcusin has taken three staff and three telehandlers out of the equation. The stacks are immaculate and it has made our trucking and shed stacking so efficient. It is a wonderful machine and I have no qualms about buying another

More pictures

Other testimonials

I chose the Arcusin because I wanted to be able to operate in small fields and on steep banks, something I felt the a...

– Simon Chiles, MultiPack B14

Finding labor during peak season turned into a daunting task I had no time for, so I started researching ways to get ...

– Jan Bezděk, MultiPack D14 & ForStack

There were days when I looked at the clouds and I knew I wouldn’t have the bales in the barn before it rained

– Clint Dahl, MultiPack D14

Being able to have tight and sturdy bundles made stacking and loading platforms so much faster.

– Albert Vilaró, MultiPack D14

Do you need more information? Contact us!

*REQUIRED FIELDS

Thank you!

Your message has been sent correctly

Access Private Area Arcusin

* REQUIRED FIELDS