What’s unique about this shaker?
The AutoPick MT is an exclusive shaker designed to act directly on the trunk and brunches of underdeveloped trees, performing vibration on any type of olive or nut tree. Its extendable telescopic arm can reach branches that are usually unaccessible by other vibrators, increasing the amount of total fruit harvested.
It is rear-mounted and offers the possibility to attach a PARK umbrella for easier recollection
Optimal vibration after 30 years of experience
Arcusin patented kickback system
Ideal for trees with more than one trunk, from 6 cm to 23 cm in diameter
The MT maximum clamp aperture is 25 centimeters
Can reach the most inaccessible branches with its telescropic arm (95 cm)
Adapted to all terrain and orchard types
Ideal for small tractors
65 HP double traction without umbrella and 75 HP double traction with umbrella
Maximum efficiency in harvesting large olive and nut quantities
Can vibrate on underveloped trees without damaging their integrity
Maximum profitability for the farm
Production increases year after year, product is left clean and ready for sale or subsequent processing
Configurations
Choose the right set-up for your operation
Rear-mounted without umbrella:
65 HP double traction
It can be front-mounted only without umbrella
Rear-mounted with PARK umbrella
tractor 75 HP double traction. For farms with planting frames starting at 5×5.
Key features
Clamp
Multipurpose clamp that can work directly on trunks shorter than 24 centimeters or on secondary branches for taller trees. Optimal vibration is accomplished thanks to its 360º rotatory movement which allows to reach more parts of the tree, resulting in increased harvest production.
The clamp is equipped with natural rubber studs of different hardnesses to adapt to all types of plantations depending on the harvesting season.
Head
The head is the part of the machine in charge of transmitting vibration to the tree.
Unlike the rest of the shakers, the vibration of the MT model is linear. It guarantees perfect vibration coverge in the entire tree without damaging its integrity, achieving excellent product yields.
Telescopic arm
Thanks to its telescropic arm the MT shaker can work on branches that are totally inaccessible by other vibrators in the market
Hydraulic group
One variable displacement pump with balanced hydraulic blocks for maximum efficiency
Electronic control via joystick
Full maneuverability control from the tractor cabin
Automatic working cycle: close clamp, vibrate in both directions, open clamp
Timers for each vibration sense
Pump protection system
Vibration braking control
Adjustable timers for self-tightening of the head clamp
PARK
The PARK model can be attached to all our vibrators
Innovative canvas
Made with dividers and welds to optimize product recollection Diameter of 6,5 meters with possibility to extend to 8 meters
Customizable canvas height
Two measurements: 1,5m vs 1,8m
Aperture of 95m
The entrance mouth of the umbrella at the foot of the tree is 95 cm wide
Loading capacity of 400 kg
The unloading operation is carried out by opening the lower hatch
Dimensions
AutoPick MT
PARK
A
6500 mm
B
6500 mm
C
1600 mm
Looking for a simpler model?
Check out the Autopick GTi, our simpler model offering the same vibration quality